MOUNTING ACCESSORIES
Optimally matched to the Luminatore® aluminum profile system!
wall and ceiling mounting bracket
Application: mounting profiles or frame systems to walls, ceilings or other substructures with the appropriate load-bearing capacity.
Type of mounting: screwing
The wall and ceiling mounting brackets in our range ensure that our systems always hold well on any type of substructure.
Be it simple slatted back walls, roof beams or constructions with cavities - from the Lightmaster Professional 200 mm to Lightmaster Professional 62 mm, these brackets keep everything in place.
standard corner connection bracket
Application: assembly of corner connections of the Lightmaster profile series
Type of mounting: screwing
Our standard corner connection brackets are solid and simple
standard variant for connecting the corners of frame parts of our systems.
With two integrated screws for clamping in the profile, these angles are easy to use in all common projects.
tool-free corner connection brackets
Application: Securing corner connections of the Lightmaster profile series
Type of mounting: screwing
The tool-free corner connection angle replaces the standard corner connection angle and also brings a significantly higher level of security and stability with stronger material and larger contact surface of the legs and through holes for fixed screw connections with the profile.
The assembly time is reduced by up to 50% compared to the simple angles and a flush stop eliminates the annoying alignment of the miters. Particularly recommended for ceiling suspensions or XXL structures.
standard longitudinal connector
Application: Securing longitudinal connections of the Lightmaster profile series
Type of mounting: screwing
Our longitudinal connectors give the profile connections the necessary hold on impact. The 125mm long connectors are clamped in the profile with four grub screws and, with a span of 62.5mm in each frame, they offer the optimal hold for multi-sectioned frame systems. This enables the production of frame frames in desired divisions.
Fast-Lock PCB clip
Application: PCB holder for the Lightmaster profile series
Type of mounting: snap in
The Fast-Lock clips snap into the screw holes of the circuit boards from below and can be attached to the profile with a simple 90 ° turn, without the hassle of screwing or sliding nuts.
The Fast-Lock clips not only save time and money, but also weight. The Fast-Lock clips made of die-cast plastic dispense entirely with solid metal parts and thus enable a weight saving of over 50% compared to our standard solution. Perfect for transports and suspensions where every gram counts!
heavy duty foot
Application: weighting and securing of free-standing frame systems
Type of mounting: screwing
The heavy-duty feet made of 8mm steel are perfectly suitable with their high weight in order to realize even larger frame systems free-standing.
The threaded pin is long enough to make the adjustable feet disappear under the exhibition floor if necessary, in order to achieve the cleanest possible appearance.
ceiling suspension frame intake
Application: Securing hanging frame systems and stand elements
Type of mounting: screwing
The Luminatore® ceiling suspension sets can easily be used with frame systems of any depth and construction form. Due to the modular structure, the application is not limited to a certain profile thickness, but can be expanded as desired by adjusting the screw length.
ceiling suspension rope set
Application: Rope set for setting the height position
Type of mounting: -
The rope set is connected to internal ring eyelets and placed under load using a wire rope tensioner. As a result, the two connected profile frames are pulled together and thus prevent the frame systems from being disconnected. This variant is particularly recommended if there are other loads under the frame system, e.g. Spotlights or speakers can be attached.
stiffening bracket set
Application: stiffening of oversized frames in Lightmaster Professional 200mm profile
Type of mounting: screwing
